WITA go.tec for demand-based water circulation
The WITA go.tec is an electronically controlled high-efficiency circulation pump. The selection button allows the operating modes to be adapted to the hydraulic requirements of the system. In addition to constant curves, proportional pressure and constant pressure curves are available. SmartAdapt supplements manual setting with automatic adjustment.
Operation and operating modes
The pump curve display makes the selected setting visible on the unit. The key lock protects against unintentional changes. A venting function supports commissioning of the pump; the system itself must be filled and vented by a qualified technician. The anti-blocking function supports restarting after periods of standstill.
Selecting the right model variant
With model variant 40/60, the delivery head is configurable to 4 or 6 m; with 70/80, to 7 or 8 m. WITA designates PWM1 for heating and PWM2 for solar. The required PWM connection cable must be ordered separately and is not included in the scope of delivery.
The product series is offered with different delivery heads, connections and installed lengths, as well as with a grey cast iron or stainless steel housing. The required operating point, the pumped medium and the installation dimensions are decisive for selection. A higher delivery head alone does not make a model variant the right replacement. The choice of material does not replace verification of media approval.
Installation and electrical connection are carried out by qualified specialist personnel in accordance with the WITA instructions. The permissible media temperature depends on the ambient temperature. Dry running must be avoided.
Optional accessories for the heating circuit
The WITA sludge and magnetite separator DN25, 1 inch female thread can be used to separate impurities in the heating water. It is a separate system component, not a directly screw-on replacement for pump unions. Connection adaptation and hydraulic design must be checked on site. The recommendation applies to heating water and operating temperatures up to 90 °C within its permissible operating limits.
Scope of delivery
- One WITA go.tec circulation pump in the selected model variant
- Two flat gaskets
- Thermal insulation
- 1 m power cable
- Original installation and operating instructions